I just acquired a 68 M715. I don't have much information about it and it need some work before its drivable. Any suggestions where to find parts or information as I need it. (truck is completely stock and hasn't run since 1988)
I just acquired a 68 M715. I don't have much information about it and it need some work before its drivable. Any suggestions where to find parts or information as I need it. (truck is completely stock and hasn't run since 1988)
You have found it!....Ask away on particulars and we will help however we can...My great grandmother lived in Hellertown, haven't been there in years.
Is that real money?
Welcome! As mentioned above, this is THE place to come for information. If you ask specifics, many of us can steer you to what you need and/or need to know.
I am a stock guy and try to keep my truck as it came from Kaiser in 1969. The manuals above are all about this truck. If you intend to keep it stock, it is very easy. There are however a few parts that just are not available. But many perishable items are out there.
Ask away and we love pictures.
Happy Holidays.
My truck is old and has been sitting since 1988, the wiring in it has become... crispy... are there any good aftermarket harnesses or is it better (and cheaper) to just rewire it on my own.
My truck is old and has been sitting since 1988, the wiring in it has become... crispy... are there any good aftermarket harnesses or is it better (and cheaper) to just rewire it on my own.
What I have found (on my truck) is that the wires are usually in bad shape where they were exposed to the atmosphere. However, under the black non-adhesive wrapping, they were like new. Maybe you could get some vintage 14 AWG rubber coated wire and splice under the wrapping a new piece where it is bad. I don't know how many wires are bad in your harness. I didn't crimp the splice, rather soldered it and covered with heat shrink tubing.
If you check the auction site, often they have wiring harnesses for other vehicles which is a wealth of connectors, ends and wire. You can cut off what you need.
Just a thought though...
A "correct" replacement harness would be super expensive, you can get an affordable new harness from speedway or summit or one of the hot rod companies. Like Don said, might way cheaper to just repair some spots but that is going to depend on your assessment of your harness..
Is that real money?
How do I go about adding new LED lights to my truck (off road lights) most are 12v is it easier to just get the converters or should I look fro 24v alternatives
Site Upgrade, Design Modifications & Administrative Support by: Palm River Enterprises LLC, IT Solutions President: Tom King, User ID=teking |
This site is owned and operated by: M715 Zone, LLC President: Jon Schmidt, User ID=brute4c |
Copyright Notice: This web site is subject to the protection of the copyright laws of the United States and other countries. Except for Personal Use Only, you may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information obtained from any part of the M715 Zone website without the prior written permission of M715 Zone, LLC. Written permission can only be obtained by contacting brute4c@m715zone.com |