-
-
-
-
Presto! Like new.
More awesome work.
-
lu4 winch rebuild
I had to tear down my spare winch down to get a good brass gear.
old parts new parts
1-CR 12424 1- SKF 7440
1-CR 511430 1-SKF 44968
2-CR9994 4-SKF9998
1-CR349BM216 2-SKF 44968
2- timken 23256 cup
2-timken 23100 roller
some of the order seals were wider so I used 2 to fill the hole
https://farm1.staticflickr.com/805/4...5436ab4d_c.jpgm715 270 by tom boyer, on Flickr
https://farm1.staticflickr.com/873/2...b13102a1_c.jpgm715 274 by tom boyer, on Flickr
-
-
-
Nice!...You make the pins or some other application?
-
turned the pins out in the shop
-
Fantastic work.
See... guys like you.. That's why I don't bother posting a build thread here. I just bolted a shiny 390 in Detroit Diesel Green to a T18 with 30 year old grease on it and stuffed them in a frame with 50 year old dirt on it.
Reminds me of the time I was at the shooting range, popping off mediocre groups with .223 at 50 yards... and a Texas Ranger rolls up and starts snapping off bull's eyes at 100 yards with a custom 1911 in .38 Super...
I packed up and left.
I fired up the 390 for a few seconds yesterday. Needs a boatload of carb and timing adjusting... just waiting on the radiator now.